Connectors from the Danish company Kabelcon, original, self-installing without a press machine
The price of one piece is 4.5 riyals
Cabelcon F-56-5.1 self install
Cabelcon Self-Install™ is a unique product developed to replace low-quality connectors - often used for household installations. Installation is easy, simple and more accurate than ever.
The connector is automatically attached to the cable while the connector is being installed. Remains
Installed - also after removing it from the unit
Operation up to 3GHz
Easy and secure installation in seconds
One-piece connectors - no loose parts
No pressure or special tools needed
Coated with unique Nitin-6™ coating
Unique Self-Install™ Compression System
Professional quality and excellent performance
Simple instructions - anyone can install it
Fits many standard RG6/59 cables (3.9 + 4.9 + 5.1 + 4.9 Q)
Technical data (typical)
Operation up to 3GHz
75 ohm impedance
shielding efficacy. 30-862MHz 110 dB
shielding efficacy. 862-3000MHz 90dB
Transfer impedance 5-1000MHz <5mOhm
Return Loss @ 1000MHz (Type) 37 dB
Return Loss @ 3000MHz (Type) 28 dB
IMD (third order @ 2x100mW) -120 dB
IMD (IP3 value) +80 dBm
AMP . rated cable data
the above. Tensile strength (total) 200
Easy to operate - impossible!
Installation is easy, simple and more accurate than ever. Undo the cable and press the connector - it's that simple. The
The Cabelcon Self-Install™ connector is automatically attached to the cable without a compression tool. And you can't get rid of it! Typical pull strength is better than cable specification.
Self-Install™ - also for professionals
Self-Install™ is also for the professional installer. Both electrical and mechanical connector performance are up to professional standards. Self-Install™ is available for both indoor and outdoor applications.
——————————————————
Cabelcon Self-Install™ is a unique quality product developed for replacement of low quality screw-on connectors - often used for home installations. Installation is easy, simple and more precise than ever before.
The connector is automatically fastening to the cable as the connector is installed. It remains
fastened – also after dismounting from the unit
Operational to 3 GHz
Easy and safe installation in seconds
One-piece connectors – no loose parts
No compression or special tools needed
Plated with our unique Nitin-6™ plating
Unique Self-Install™ compression system
Professional quality and excellent performance
Simple instructions – can be installed by anyone
Fits many standard RG6/59 cables (3.9+4.9+5.1+4.9 Q)
Technical Data (Typical)
Operational to 3 GHz
Impedance 75 Ohm
Shielding Eff. 30-862MHz 110 dB
Shielding Eff. 862-3000MHz 90 dB
Transfer Impedance 5-1000 MHz <5 mOhm
Return loss@1000 MHz (typ) 37 dB
Return loss@3000 MHz (typ) 28 dB
IMD (3rdorder@2x100mW) -120dBc
IMD (IP3 value) +80 dBm
AMP rating cable data
Max. Tensile strength (overall) 200
Easy on - impossible off!
Installation is easy, simple and more precise than ever before. Strip the cable and push on the connector – it's as simple as that. The
Cabelcon Self-Install™ connector isautomatically fastening to the cable without a compression tool. And you can't get it off! The typical pull strength is better than cable specification.
Self-Install™ - also for professionals
Self-Install™ is also for the professional installer. Both electrical and mechanical connector performance is up to the professional standards. Self-Install™ is available both for indoor and outdoor applications.
