Inverto Pickup Premium 8 Ports
Technical Specifications:
Input frequency range 10.7GHz ~ 12.75GHz
Output frequency range
950MHz~1950MHz
Low Frequency LO
9.75 GHz
High band LO frequency
10.6 GHz
Noise figure
0.7 dB type. (1 dB max)
LO frequency accuracy @25°C
±400 kHz max.
LO temperature deviation ± 800 kHz max.
LO phase noise @ 10 kHz
-90 dBm/Hz max.
Conversion earn
55 dB min.
Gain ripple (over 26MHz bandwidth) ± 0.6 dB
Contrast gain (across the full range) ± 4 dB
Image Reject
40 dB min.
Class III intermodulation - ICP3 type 10 dBm.
1 decibel pressure point (@output) 0 decibels min.
Cross-polarization isolation 22 dBm.
Ca(V) control signal
10.0V ~ 14.0V
Cb control signal (H)
16.0V ~ 20.0V
Cc control signal (range switching)
22 kHz ± 4 kHz
VSWR . output
2.3: 1
At the level of the spurious range -60 dB max.
current consumption
210 mA max. @ 11 VDC ~ 20 VDC
Operating temperature
-30°C~+60°C
Output impedance (LNB2)
75
Output Connector Type
F type (female)
Plate ratio F/D 0.6
Weight 299 grams
——————————————————
Technical Specifications
Input frequency range 10.7GHz ~ 12.75GHz
Output frequency range
950MHz ~ 1950MHz
Low frequency LO
9.75 GHz
High band LO frequency
10.6 GHz
Noise figure
Type 0.7 dB. (1 dB max)
LO frequency accuracy @ 25 ° C
±400 kHz max.
LO temperature deviation ± 800KHz Max.
LO phase noise @ 10 kHz
-90 dBm/Hz max.
Transfer earning
55 dB min.
Gain ripple (over 26MHz bandwidth) ± 0.6 dB
Acquisition of contrast (across the full range) ± 4 dB
Image rejected
40 dB min.
Class III intermodulation - type ICP3 10 dBm.
1 dB pressure point (@ output) 0 dBm.
Isolate cross polarization 22 dB min.
Control signal Ca (V)
10.0V ~ 14.0V
Control signal Cb (H)
16.0V~20.0V
Control Signal Cc (Band Switch)
22 kHz ± 4 kHz
VSWR output
2.3: 1
In the level of the marginal range -60 dB max.
Current consumption
210 mAh max. @ 11 VDC ~ 20 VDC
Operating temperature
-30°C ~ +60°C
Output impedance (LNB2)
75
Output connector type
F type (female)
Dish ratio F/D 0.6
Weight 299 grams
